| 4-May-2006 |
Version 1.8. Support for Video for Windows, mutli camera
display. Free copy of Always Up. |
| 29-Nov-2005 |
Added support for Hawking MJPEG cameras 210 and 230. Disables
alarms while camera moving while patrolling. |
| 4-Nov-2005 |
Small bugfixes. Flip in conjunction with mask bitmap did not work. Fixed. Stop Patrolling did not always reset save mode. Fixed. |
| 25-Jul-2005 |
Fixed patrolling bug. This bug caused patrolling to stop under some circumstances. |
| 13-Jul-2005 |
Added option to stay on patrol position until motion stops. When active there needs to be no motion for the defined patrol interval before camera will move to the next preset patrol position. This acts as an intelligent motion seeker. |
| 1-Jun-2005 |
Added more MPEG4 cameras, eg Vivotek 6112, Level One, Hawkingtech, 4XEM. Trendware. Added NCWMON external watchdog program. |
| 5-Mar-2005 |
Version 1.75. Added MPEG4 support for Vivotek and Dlink MPEG4 cameras and servers.
New in version 1.75:
- MPEG4 support for Vivotek and DLink MPEG4 devices
- USB Joysticks can be used to Pan/Tilt/Zoom
- Highlight Motion: You can switch on motion highlighting to see where on the image motion is being detected. Useful when setting up motion detection; also can be used to catch the eye when motion occurs
- Darkness level can be defined. If pixels are darker than this level then no motion detection is performed on these pixels
- Ability to use HKEY_LOCAL_MACHINE registry key. Useful when running as a service as both normally-run and run-as-service modes use same registry settings.
- Multiple email recipients for alarm messages
- Support for named presets: For cameras that support preset positions you can now associate names with preset numbers (eg front yard, car park).
|
| 16-Feb-2005 |
USB Joystick can be used for PTZ. Added preset names, preset support for new Axis devices (eg 213, 241) and Sony SNC-RZ30 |
| 17-Jan-2005 |
Intellinet CPU usage greatly reduced (this fixes a bug that was recently introduced). Quad screen now remembers settings and omits disabled cams |
| 6-Dec-2004 |
Version 1.7. Includes support for Netcam Watcher Remote Control remote access client.
New in version 1.7:
- Remote Access: You can access the cameras and recordings from a remote location using Netcam Watcher Remote Control.
- Quad Display: You can rotate the pictures shown on the quad display so you can show the first four, the second four, and so on.
- New Alarm Action: Open web page in browser of camera that caused alarm.
- FTP: Now you can automatically return a camera to home position (preset number 1) before FTPing images to a remote host, so the same shot gets sent each time.
- Motion and Offline Alarms can now be enabled separately, so you can have for example only offline alarms.
- Test Alarm facility to allow easy testing of alarms.
- TCP activated Motion Detection: Motion recording can be started and stopped by TCP messages. This is mainly to support devices that support built-in motion detection such ax Axis 241 servers.
- SMTP Authentication: Added ability to specify Username and Password for SMTP (email) servers that require this.
|
| 12-Oct-2004 |
Open Camera Homepage Alarm; Test Alarm Facility; Fixed bugs in TCP-activated motion detection; other minor bugfixes. |
| 14-Sep-2004 |
Added support for Axis TCP-activated motion detection. This is a kind of motion detection supported by some Axis devices, eg 241Q server. The server detects motion and sends a message to Netcam Watcher to tell it to start and stop recording. Also added IQin Vision 2-megapixel network cameras. |
| 1-Sep-2004 |
Memory leak when using "deletefiles after XX days" fixed. Added Axis 206, 206M, 210 and 211 cams |
| 26-Aug-2004 |
Improved support for Sony RZ30 / 20 Cams |
| 23-Aug-2004 |
Added VEO Observer XT support. Note that at the moment only guest access is supported (enable this in the camera). When VEO produce full SDK we will support this camera fully. |
| 16-Aug-2004 |
Fixed problem with Panasonic NM100 cameras. |
| 3-Aug-2004 |
Added timeout for FTP connections. Some FTP servers were periodically not connecting and that caused the FTP function to fail. This corrects that. |
| 27-Jul-2004 |
Latest VEO firmware did not work (rel 415). Fixed. -- Patrol Schedule Bug Fixed - Masked motion detection ; slight problem fixed. New: PTZ now operable using arrow keys; File deletion can now be based on days (eg delete when 7 days old) |
| 7-Jul-2004 |
VEO Offline bug fixed. (Offline condition not being reported properly on VEO cameras. Other camera types not affected.) |
| 2-Jul-2004 |
Motion detection notification bug fixed. (If you set email alarm with picture attachment, the wrong image was being sent -- the one before motion occurred) |
| 24-Jun-2004 |
Masked motion detection bug fixed. (Sometimes the masking was not working.) |
| 31-May-2004 |
Version 1.6 bugfixes |
| 14-May-2004 |
Version 1.6 |
