| | | | | |

Requirements Netcam Watcher Professional or Netcam Watcher Remote Control: Requires PC with Windows 98, ME, 2000 or XP plus an Internet or network connection and minimum 256Mb of RAM. Netcam Watcher Professional: Recommended Windows 2000 or XP and 1Ghz or faster processor and 256Mb+ RAM. Multiprocessor enabled on supported operating systems. For serious use, do not use Windows 98 or ME. Performance The actual performance that is achieved is dependent on many variables, such as the PC, network and cameras used. It is also affected by the display modes set up - the more cameras on-screen the more CPU needed. But as an example, we have motion detection recorded up to 200 Total frames per second on a 3.6Ghz Pentium 4 with 1GB RAM. (Frame size was 320x240), using a mixture of cameras from different manufacturers, including Axis, Panasonic, Sony and Vivotek. To increase the performance of a specific system, use a faster CPU. You can also use faster RAM and disks, but the main bottleneck is the CPU. Disk Space The amount if disk space needed depends completely on how long you want to retain your recordings. If you record every frame then it is a fairly simply matter to calculate the disk space requirements. Simply record for one minute and note the file size generated. This will vary depending on the camera, frame size, frame quality and the frame rate. This is why we cannot give an answer here, and it's best to measure this yourself using the settings that you plan to use. Now multiply that file size by 60 to get the amount per hour. And multiply by 24 to get the size per day (assuming that you record 24 hours a day). However, the best way to use Netcam Watcher is to use Motion Detection recording. And normally this will reduce the disk space used by up to 98%. Of course, it depends on how much motion and is impossible to give a figure that is meaningful. A busy road may not show much reduction while a secure area may show almost 100% reduction. The only way to estimate this is to record for a day or two and measure the size of the recordings. Sizing a system can be tricky. If you need any help please contact us as we will be pleased to give advice. Entire site Copyright © 2007 Beausoft Ltd - All rights reserved.

Read the frequently asked questions. [more] Typical Applications for Netcam Watcher. [more] See a complete list of supported cameras. [more] What others say about Netcam Watcher Professional. [more] Compare the Home and the Professional Edition. [more] See the full price list. [more] Get a copy of AlwaysUp with every NCW purchase [more] Take the Feature Tour of Netcam Watcher. [more]